3003 aluminum coil a ni a.

3003 Aluminum Coil hi aluminum alloy material hman tlanglawn tak a ni a, manganese a awm bawk. Pure aluminum coil 1100 nen khaikhin chuan a chakna a sang zawk a, corrosion resistance a nei tha zawk bawk. He alloy hian processing performance tha tak a nei a, siam awlsam leh weld a ni a, chakna leh formability engemaw zat mamawhna atana hman tur a ni. 3003 aluminum coil hi tank siamnaah te, pawn lam panel, truck body, pipe, leh in chhunga hmanrua siamnaah te hman a ni nasa hle. A man tlawm-Effectiveness hian industry leh nitin mamawh tam tak siamna atana hmanraw duh ber a ni.

I. A bulpui ber ziarang .

Material siam dan .

Aluminum 99.6% aia tam emaw, a tlukpui emaw a awm a, manganese chu primary alloying element (1.0%-1.5%) a ni a, aluminum-manganese alloy chhungkaw zinga mi a ni.

Density 2.73 g/cm3 a nih chuan a chakna chu aluminum thianghlim aiin 20% in a sang zawk a, chutih rualin ductility tha tak a vawng reng bawk.

Taksa lam thil (physical property) .

Aluminum alloy tam zawkah electrical conductivity sang zawk a nei a, thermal conductivity sang tak a nei bawk a, hei vang hian heat dissipation application atan pawh a tha hle.

Dense surface oxide film hian boruak chhe thei leh boruak lum leh vawt laka invenna a pe a, pawn lama hman atan a tha hle.

Mechanical thil neih 1.1.

Tensile strength 110-200 MPa (tempering state nen a danglam), elongation 6%-30% a ni.

Heat-a chak zawk nan enkawl a ni thei lo; A chakna tihpun nan cold working a ngai a ni.

II a ni. Thil siam chhuah dan tur .

Smelting leh casting .

High-purity aluminum ingots leh manganese te chu proportion dik takin an melt a, an cast leh roll chhunzawm zel a, aluminum coil blank an siam a. Hot-rolled leh cold-rolled controlled thickness (0.01-300mm) atan, a hnuah cold rolling hnuah annealing hmangin hardness leh softness a awm.

A chung lam enkawlna .

Anodizing, colour coating (fluorocarbon spraying ang chi), emaw, khaw lum leh khaw vawt laka invenna emaw, cheimawina (decorative effects) tihchak nan embossing a awm bawk.

iii a ni. A hmanna tur pawimawh ber berte .

Architectural decoration .

Curtain bang leh ceiling (0.8{{1}1.5mm thickness), kum 20 thleng khaw lum leh khaw vawt laka inven theihna tur color-coated.

Industrial lama thil siam chhuah .

Power battery casing leh pipe insulation (3003H14/H24) te a awm bawk.

Chaw ei tur tank leh chemical dahna (a chhe thei em em-resistant).

Thilthawnna

Automotive Taksa peng leh fuel tank (a rit loh nan).

iv. thil lei dan tur kaihhruaina .

Specifications 1.1.

Thickness hi hman tum ang zela thlan tur a ni (eg, packaging atan 0.1-0.3mm, construction atan 0.5-2.0mm).

Condition hriat theihna .

H14/H24 hian cold work hardening℃a tarlang a, condition O erawh chuan soft state (deep drawing atan a tha) a entir thung.

A chung lam quality .

Mirror, matte, emaw color-coated finish te chu application a zirin thlan a ni.

3003 Aluminum coil, a chakna inthlauhna, a corrosion resistance, leh a hnathawh theihna te chu industrial field-ah chuan versatile material a ni ta a ni.

I. Thickness specification 1.1.

A thickness range pangngai .

Thin plate: 0.1-0.3mm (packaging leh battery shell ang chi mamawh rit lo tak tak atan hman tlanglawn)

Medium Plate: 0.5{{2}2.5mm (Curtain bang leh lirthei fender siam ang chi application lian ber ber) . Extra-thick plate: 3.0-6.0mm (industrial container, structural component lian tak tak)

Thickness bik mamawh .

Ultra-thin foil: 0.006-0.1mm (ei leh in tur siamna atana hman tur aluminum foil)

Custom thick plate: 500mm thleng (hot-rolled, specialized industrial application atan)

II a ni. A zau zawng Specifications .

Standard zau zawng .

A zau zawng: 100-600mm (battery casings, stamping part te te)

A zau zawng: 800-1600mm (architectural decoration, general industry)

Extra- a zau zawng: 2000-2650mm (curtain bang lian tak tak, silos)

Custom slitting 1000 a ni.

Supports on-Demand slitting, a zau zawng adjustment accuracy ±1mm a ni.

iii a ni. A sei zawng tarlanna .

Coil sei zawng .

Standard coil sei zawng: 500-8000mm (a thuk zawng leh a rit tihtlem dan tur a ni)

Extra-Custom coil rei tak: siamtu thenkhat chuan 16000mm aia tam coil chhunzawm zel an pe thei.

Plate sei zawng .

A sei zawng tlangpui: 1000×2000mm, 1220×2440mm (building boards) a ni.

iv. State hriat theihna leh hnathawh dan .

Common state 1.1.

o State : Annealed a nem tak tak, a sei zawng chu 20% aia tam emaw, a tlukpui emaw a ni (drawing processing thuk tak).

H14/H24 : Semi{{2}chuan dinhmun a harsa a, tensile strength 140-180mpa (balancing strength leh formability) .

H18 : fully hard state, chakna sang ber mahse plasticity hniam (rigidity scenario sang tan).

State bik a ni a .

H32/H34: stabilized, precision processing atan a tha.

V. Surface enkawlna tur kawng hrang hrang .

Base lei chunglam .

Mirror/Matte: Electronic hmanrua leh decorative panel atan a tha.

Embossed texture: anti-slip property (diamond pattern ang chi, orange peel pattern ang chi) tihchak a ni.

Color coating tih dan tur .

Fluorocarbon spraying: Kum 20 chuang zet khaw lum leh khaw vawt laka inven theihna (building curtain wall). Polyester coating: a man tlawm zawka siam (in chhunga chei nan).

3003 Aluminum coils hian specification hrang hrang a pe a, a hmangtute chuan an mamawh bik a zirin thickness, width, leh surface treatment combination te an thlang thei a ni.